A Guide to Choosing the Right Scroll Saw Blade
It is important to choose the right kind of scroll saw blade because it will affect the smoothness of the cut and even the safety of the person who will be operating the saw. Below is a discussion on some of the things that you need to check first before purchasing a scroll saw blade.
One thing you need to consider before choosing the right blade is the type of material that you will be cutting. If you are cutting wood then a regular saw would do but there are some materials that you can only cut with specialty blades.Charts showing the right speeds and thickness of materials for each type of blade are found in most manufacturer sites. It is an advantage if your consult the chart so you can make sure that you are using the right blade for the right material.
Check on blade quality because it affects the cut. All blades are made from steel blanks. Scroll blades are hardened and tempered. To make a quality blade is to have a quality steel and a quality tempering process. A higher quality of steel and a more refined process of tempering are needed so that the blade comes out of a higher quality also.When cutting hardwood, the quality of the blade is very important.The blade number is higher when it comes to cutting hardwood.
It is important to note the thickness of your wood because it will determine the type of blade to use. When your wood is thick then the proper blade to use is that one that has less teeth per inch. For thinner wood the opposite is true. 4 teeth is the wood is normal at a time but for hardwood it is best to have 3 teeth at a time only. When saw dust cannot clear out because there are too many blades in the wood then the blade usually gets too hot and will cause the wood to burn.Too many teeth in the wood can make the blade go out of control on the table.
The 10 Best Resources For Tools
Cutting very intricate patterns requires saws with very fine blades. To have long curves on the outside of the wood you need increase the cutting speed. For the long curves on the outside, the proper blade to use is the one with fewer teeth. It may be a rough cut but it is much quicker to cut.
A 10-Point Plan for Saws (Without Being Overwhelmed)
A blade with more teeth and heavier gauge is the best for the person who is new in using a scroll saw. This is because it will be much easier to control.